Camco D-Power 4 User Manual download pdf (Page 17)

4 OPERATION

USER MANUAL

D - P O W E R S E R I E S

P. 16

D - P O W E R

S E R I E S

4.1 Controls

4.1.1 Volume Control

A volume control with 41 notched settings controls the audio signal. These set-

tings have been selected to correspond to human hearing characteristics (loga-

rithmically) and therefore guarantee an optimal range of settings for practical

applications. Each channel can be set individually except when operating in

mono modes whereby only channel A is active.

Set the volume to zero before turning on the ampliﬁer to prevent the occur-

rence of sudden high volume levels which may cause damage to your hearing

and/or the speakers.

4.1.2 Gain Selector

A switch on the rear of the D-POWER allows the maximum ampliﬁcation attain-

able to be set directly in the input stage.

The D-POWER ampliﬁer has a 26 dB and 32 dB

voltage gain setting along with a 1,4 V sensitivity

setting.

4.1.3 Gain and Input Sensitivity

The table shows input sensitivity per channel for a given gain and load. It also

shows the gain for the 1,4 V input sensitivity.

Model 26 dB 32 dB 1,4 V

D-POWER 2

1200 W @ 4 Ω

700 W @ 8 Ω

3,47 V

3,75 V

1,74 V

1,88 V 34,56 dB

D-POWER 3

1600 W @ 4 Ω

915 W @ 8

4,01 V

4,29 V

2,01 V

2,15 V 35,72 dB

D-POWER 4

1900 W @ 4 Ω

1100 W @ 8

4,37 V

4,70 V

2,19 V

2,36 V 36,52 dB

4.1.4 Limiter Switch

This switch is located at the rear of D-POWER. It allows you to set the mode of the

limiter. There are three modes. (See 4.3.1 Clip Limiter)

Right position: Middle position: Left position:

Clip Limiter: Fast Clip Limiter: Slow Clip Limiter: Off

Fast attack time Slow attack time Limiter disabled

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Camco D-Power 4 User Manual Page 17

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Camco D-Power 4